Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to rot or rust like timber and aluminum.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However, if windows with double panes are secured by internal beading it will be more difficult to remove the old panes and put in new ones. In this instance you'll need find some plastic spacers to assist the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall onto the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the distance between the window and the door is significant, you may want to use an alarm system that includes a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows so you can reach the frame. Then, using the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you're satisfied with the size of the window, you can tighten screws to keep them in the right position.

If you are unable to reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen. This is often caused by screws that have been removed over time, but it can be due to the handle mechanism wearing out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to close the window and then perform a test fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's important to take action. Windows website that leak water do are not just a cause for destruction of your home's structure but also hinder your efforts to control the temperature within your home. The most frequent reason for leaks in uPVC windows is that the upvc windows repairs sealant surrounding the frame is either damaged or not present.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer of caulk is applied. When it is time to uPVC repair, it is important to avoid over-caulking. This will make your window more difficult to clean and reduce its energy efficiency.

Make sure that the drainage holes are free of debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the problem website is with the seal rather than the frame. This can be easily fixed by an uPVC window window repair specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze, it may be hinges at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component hinges will be damaged over time. It's easy to change a window hinge however it is easier if someone helps you to hold the frame.

Verify that the uPVC hinges open and close in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or due to poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you suggestions.

It is also important to grease the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. It is recommended to perform this every year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. First, the hinges due to wear and tear can become misaligned, this can cause a gap to form double glazing window repairs between the sash and the frame. These can be easily fixed by giving them a good clean, but if they are beyond repair it could be necessary to have them realigned or replaced. The interlock, which is located on the hinge side of the window, may be misaligned. Again, it is feasible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next most common reason for draughts is window seals. They are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will lessen the risk of draughts.

One of the most effective ways to cut down on draughts is by using a draught excluder. These are typically made of fabric filled with some type of filler. They can be put on the top of your windowsill. These will help to keep cold air out and keep your home warm and cozy!

With a bit of regular maintenance and repairs windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to realize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.